FAQs & Troubleshooting
Popular |
PE-170D
35 Results
1.
Where do I put the oil in my machine?
2.
Place a spool of thread on a spool pin.
3.
It is difficult to pass the thread through the needle bar thread guide(hook).
4.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
5.
Embroidery
6.
When thread got tangled.
7.
How do I use the needle threader?
8.
How do I create a space between characters?
9.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
10.
"Calculating. Please wait." message appearing on the LCD. What does it mean?
11.
"Complete pattern entry." message appearing on the LCD. What does it mean?
12.
"This pattern is stored in other embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
13.
"Check if upper or lower thread is cut." message appearing on the LCD. What does it mean?
14.
Upper Threading
15.
"Saving" message appearing on the LCD. What does it mean?
16.
"No more stitches can be combined." message appearing on the LCD. What does it mean?
17.
"Color cannot be changed halfway." message appearing on the LCD. What does it mean?
18.
"Embroidery pattern is exceeding sewing area." message appearing on the LCD. What does it mean?
19.
"This key does not work when needle is at low position. Raise the needle to high position and touch key again." message appearing on the LCD. What does it mean and how do I clear it?
20.
"Raise the presser foot and re-thread." message appearing on the LCD. What does it mean and how do I clear it?
21.
"This pattern can not be saved in the memory." message appearing on the LCD. What does it mean?
22.
"No pattern is memorized." message appearing on the LCD. What does it mean?
23.
How do I correctly install a bobbin?
24.
How do I wind the bobbin?
25.
"Lower the presser foot lever." appears on the LCD.
26.
"Calculating cannot be done halfway through." message appearing on the LCD. What does it mean?
27.
"Embroidery card is not inserted. Turn off main power and insert card." message appearing on the LCD. What does it mean?
28.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
29.
"Raise the needle to high position." message appearing on the LCD. What does it mean?
30.
"Check if thread is entangled. Check if needle is bent." message appearing on the LCD. What does it mean?