FAQs & Troubleshooting
Popular |
PE-150V
35 Results
1.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
2.
It is difficult to pass the thread through the needle bar thread guide(hook).
3.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
4.
Embroidery
5.
Place a spool of thread on a spool pin.
6.
Upper Threading
7.
How do I use the needle threader?
8.
How do I wind the bobbin?
9.
"Check if thread is entangled. Check if needle is bent." message appearing on the LCD. What does it mean?
10.
Upper threading (Point)
11.
How do I create a space between characters?
12.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
13.
"Calculating. Please wait." message appearing on the LCD. What does it mean?
14.
"This key does not work when needle is at low position. Raise the needle to high position and touch key again." message appearing on the LCD. What does it mean and how do I clear it?
15.
"This pattern can not be saved in the memory." message appearing on the LCD. What does it mean?
16.
"Check if upper or lower thread is cut." message appearing on the LCD. What does it mean?
17.
Fabrics and stabilizer material for embroidery
18.
When thread got tangled.
19.
"Saving" message appearing on the LCD. What does it mean?
20.
"No more stitches can be combined." message appearing on the LCD. What does it mean?
21.
"Complete pattern entry." message appearing on the LCD. What does it mean?
22.
"Embroidery pattern is exceeding sewing area." message appearing on the LCD. What does it mean?
23.
"Raise the presser foot and re-thread." message appearing on the LCD. What does it mean and how do I clear it?
24.
"Embroidery card is not inserted. Turn off main power and insert card." message appearing on the LCD. What does it mean?
25.
"This pattern is stored in other embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
26.
Why is the outline sewing off the pattern?
27.
Why does the lower thread keep breaking?
28.
Where do I put the oil in my machine?
29.
"Lower the presser foot lever." appears on the LCD.
30.
"Calculating cannot be done halfway through." message appearing on the LCD. What does it mean?