121.

High-pitched sound while embroidering

122.

The machine does not make stitches

123.

How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?

124.

When the thread became tangled under the bobbin winder seat

125.

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." message appears on the LCD.

126.

"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?

127.

"Data volume is too large for this pattern." message appears on the LCD. What does it mean?

128.

"Check and rethread the upper thread." message appears on the LCD. What does it mean?

129.

How do I retrieve stitch patterns saved in the machine's memory or a USB flash drive?

130.

"F06" appears on the LCD. What does it mean?

131.

Embroidery Data Precautions (About the types of embroidery data that can be used.)

132.

"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?

133.

"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?

134.

"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?

135.

"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?

136.

"No more patterns can be added to this combination." message appears on the LCD. What does it mean?

137.

"This pattern cannot be used." message appears on the LCD. What does it mean?

138.

How to use the memory function to save stitch pattern combinations of character stitches or decorative stitches

139.

Stitch Data Precautions (About the types of stitch data that can be used in the Character/Decorative Stitch memory)

140.

How do I sew with the twin needle?

141.

How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]

142.

"Lower the presser foot lever." message appears on the LCD. What does it mean?

143.

"Lower the buttonhole lever." message appears on the LCD. What does it mean?