121.

It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)

122.

"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?

123.

"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?

124.

Upper thread tightened up

125.

How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]

126.

How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]

127.

How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]

128.

How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]

129.

How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]

130.

How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]

131.

How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]

132.

"This USB media cannot be used." message appears on the LCD. What does it mean?

133.

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." message appears on the LCD.

134.

"Not enough available memory to save the pattern. Delete another pattern?." message appears on the LCD. What does it mean?

135.

"Check and rethread the upper thread." message appears on the LCD. What does it mean?

136.

Embroidery

137.

List of Error Messages for Artspira app (M#######/E#####)

138.

M5541001 appears on the Artspira app screen.

139.

M4210001 appears on the Artspira app screen.

140.

How to find the security information (SSID and network key) for your home network

141.

"F05" appears on the LCD. What does it mean?

142.

"F03" appears on the LCD. What does it mean?

143.

"F02" appears on the LCD. What does it mean?

144.

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." message appears on the LCD. What does it mean?

145.

When the thread became tangled under the bobbin winder seat

146.

How do I attach or remove the Embroidery Unit?

147.

"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?

148.

"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?

149.

"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.

150.

M5613201 appears on the Artspira app screen.