FAQs & Troubleshooting
Popular |
Innov-is NS1150E
51 Results
1.
How do I wind the bobbin?
2.
Tutorial videos on how to use the machine [Video instructions]
3.
How do I adjust thread tension for embroidering?
4.
How do I hoop the fabric in the embroidery frame?
5.
How do I edit a single letter in the embroidery pattern?
6.
How do I enter a line feed in the embroidery pattern?
7.
Bobbin thread breaks
8.
How do I adjust the sensitivity of the operation keys?
9.
"Preventive maintenance is recommended" appears on the LCD.
10.
"This USB media cannot be used." message appears on the LCD. What does it mean?
11.
How do I change the needle ?
12.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
13.
Fabric puckers
14.
Stitches are skipped
15.
How do I retrieve the patterns from the machine’s memory?
16.
How do I change the font type in the embroidery pattern?
17.
How do I remove or attach the presser foot ?
18.
Where do I put the oil in my machine?
19.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
20.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
21.
How do I clean the race?
22.
"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
23.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
24.
"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
25.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
26.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
27.
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
28.
Needle breaks.
29.
How do I save the embroidery patterns in the machine’s memory?
30.
"F**" appears on the LCD. What does it mean?