FAQs & Troubleshooting
Popular |
Innov-is NQ1400E
57 Results
1.
Tutorial videos on how to use the machine [Video instructions]
2.
How do I adjust thread tension for embroidering?
3.
How do I adjust the sensitivity of the operation keys?
4.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
5.
How do I attach or remove the embroidery frame ?
6.
"Preventive maintenance is recommended" appears on the LCD.
7.
How do I select or display patterns according to the embroidery frame size?
8.
How do I retrieve the patterns from the machine’s memory?
9.
Fabric puckers
10.
How do I save the embroidery patterns in the machine’s memory?
11.
How do I thread the machine (Threading the upper thread)?
12.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
13.
How do I hoop the fabric in the embroidery frame?
14.
How do I enter a line feed in the embroidery pattern?
15.
How do I change the font type in the embroidery pattern?
16.
"F**" appears on the LCD. What does it mean?
17.
"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
18.
Stitches are skipped
19.
How do I edit a single letter in the embroidery pattern?
20.
"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
21.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
22.
How do I attach or remove the Embroidery Unit?
23.
Where do I put the oil in my machine?
24.
"This USB media cannot be used." message appears on the LCD. What does it mean?
25.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
26.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
27.
"Check and rethread the upper thread." message appears on the LCD. What does it mean?
28.
Needle breaks.
29.
Upper thread breaks.
30.
"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?