1.

How to use the Multi-purpose Screwdriver. [ Position “2” ]

2.

When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?

3.

"Preventive maintenance is recommended" appears on the LCD.

4.

"This file cannot be used." message appears on the LCD. What does it mean?

5.

How do I attach or remove the embroidery frame ?

6.

How do I remove or attach the Embroidery foot ?

7.

How do I attach or remove the Embroidery Unit?

8.

How do I set the bobbin ?

9.

How do I create a space between characters?

10.

How do I clean the race?

11.

When thread got tangled.

12.

When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.

13.

"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?

14.

"Failed to save file." message appears on the LCD. What does it mean?

15.

"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?

16.

How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?

17.

Why is the outline sewing off the pattern?

18.

Why does the lower thread keep breaking?

19.

Embroidery

20.

"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?

21.

"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?

22.

"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?

23.

How do I change the volume of operation sounds or alarm sounds?

24.

How do I change the needle ?

25.

"This USB media is incompatible." message appears on the LCD. What does it mean?

26.

"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?

27.

"USB media error" message appears on the LCD. What does it mean?

28.

"This USB media cannot be used." message appears on the LCD. What does it mean?

29.

"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?

30.

"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?