121.

"OK to delete the selected pattern?" message appears on the LCD. What does it mean?

122.

"Failed to save file." message appears on the LCD. What does it mean?

123.

How do I attach or remove the embroidery frame ?

124.

How do I change the needle ?

125.

How do I set the bobbin ?

126.

"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?

127.

"OK to move the embroidery carriage to its original position?" message appears on the LCD. What does it mean?

128.

"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?

129.

"Lower the presser foot lever." message appears on the LCD. What does it mean?

130.

"USB media error" message appears on the LCD. What does it mean?

131.

"Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?

132.

"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?

133.

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.

134.

"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?

135.

"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?

136.

"The bobbin thread is almost empty." message appears on the LCD. What does it mean?

137.

"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?

138.

"Attach the embroidery frame." message appears on the LCD. What does it mean?

139.

"Change to a larger embroidery frame." message appears on the LCD. What does it mean?

140.

"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?

141.

"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?

142.

"Lower the buttonhole lever." message appears on the LCD. What does it mean?

143.

"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?

144.

"No more patterns can be added to this combination." message appears on the LCD. What does it mean?

145.

"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?

146.

"Check and rethread the upper thread." message appears on the LCD. What does it mean?

147.

"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?

148.

"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?

149.

"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?

150.

"Cannot recognize the fabric edge." message appears on the LCD. What does it mean?