121.

"Saving the upgrade file. Do not turn MAIN power to OFF." message appearing on the LCD. What does it mean and how do I clear it?

122.

"Before embroidering, make sure embroidery frame is moved as far back as possible and the frame-securing lever is locked down. Then, press "Start/Stop" button to embroidery." message appearing on the LCD. What does it mean and how do I clear it?

123.

"Transmitting by USB" message appearing on the LCD. What does it mean and how do I clear it?

124.

"The USB media was changed. Do not change the USB media while it is being read." message appearing on the LCD. What does it mean and how do I clear it?

125.

"USB media is not loaded. Load USB media." message appearing on the LCD. What does it mean and how do I clear it?

126.

"Not enough available memory to save the pattern. Delete another pattern?" message appearing on the LCD. What does it mean and how do I clear it?

127.

"Change to a larger embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?

128.

"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?

129.

"This key does not operate when the needle is down. Raise the needle and press the key again." message appearing on the LCD. What does it mean and how do I clear it?

130.

"Lower the presser foot lever." appears on the LCD.

131.

"This button cannot be used if the embroidery unit is attached." message appearing on the LCD. What does it mean and how do I clear it?

132.

"There is a pattern included that can not be saved to USB media/computer. Save the pattern in the machine's memory." message appearing on the LCD. What does it mean and how do I clear it?

133.

"In twin needle mode, the needle thread lever cannot be used." message appearing on the LCD. What does it mean and how do I clear it?

134.

"Connected to PC. Do not disconnect the USB cable." message appearing on the LCD. What does it mean and how do I clear it?

135.

"OK to automatically lower the presser foot?" message appearing on the LCD. What does it mean and how do I clear it?

136.

"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." message appearing on the LCD. What does it mean and how do I clear it?

137.

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.

138.

"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?