FAQs & Troubleshooting
Popular |
HS-2500
74 Results
1.
Place a spool of thread on a spool pin.
2.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
3.
The bobbin thread cannot be pulled up.
4.
How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
5.
Combination of fabric, thread and needle
6.
How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
7.
How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
8.
How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
9.
Fabric and Thread
10.
An "E3" message appears on the panel.
11.
How do I sew an applique?
12.
How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
13.
How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
14.
How do I change the needle ?
15.
How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
16.
How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
17.
How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
18.
How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
19.
How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
20.
How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
21.
It is difficult to pass the thread through the needle bar thread guide(hook).
22.
How do I clean the machine? (Cleaning the race)
23.
An "E4" message appears on the panel.
24.
When thread got tangled.
25.
How do I remove or attach the presser foot ?
26.
How do I install the bobbin wound with thread? (For models equipped with the quick-set bobbin)
27.
How do I thread my machine? (For models equipped with the needle threader)
28.
An "E6" message appears on the panel.
29.
Why does my thread keep jamming?
30.
Why won't the machine pick up the bobbin thread?