FAQs & Troubleshooting
Latest |
HE-120
65 Results
1. 12/12/2018
It is difficult to pass the thread through the needle bar thread guide(hook).
2. 12/12/2018
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
3. 12/12/2018
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
4. 12/12/2018
When thread got tangled.
5. 12/12/2018
Fabric and Thread
6. 12/12/2018
Incorrect thread tension
7. 02/16/2017
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
8. 05/26/2016
When should I use the extra spool pin?
9. 03/31/2016
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
10. 03/31/2016
"Saving..." message appearing on the LCD. What does it mean?
11. 03/31/2016
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
12. 03/31/2016
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
13. 03/31/2016
"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
14. 03/31/2016
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
15. 03/31/2016
"Finish editing the pattern before sewing the pattern." message appearing on the LCD. What does it mean?
16. 03/31/2016
"Data volume is too large for this pattern." message appearing on the LCD. What does it mean?
17. 03/31/2016
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
18. 03/31/2016
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
19. 03/31/2016
"Winding bobbin thread." message appearing on the LCD. What does it mean?
20. 03/31/2016
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
21. 03/31/2016
How do I thread the needle?
22. 03/31/2016
How do I wind the bobbin?
23. 03/23/2016
How do I load the spool into the thread cassette?
24. 10/23/2015
Why does the lower thread keep breaking?
25. 10/21/2015
Combination of fabric, thread and needle
26. 05/14/2015
How do I create a space between characters?
27. 05/14/2015
"Selected a pattern." appears on the LCD.
28. 05/14/2015
"Twin needles can not be used for this pattern." appears on the LCD.
29. 05/14/2015
"Change to the single needle mode." appears on the LCD.
30. 05/14/2015
How do I clean the race?