FAQs & Troubleshooting
Popular |
CS-80
39 Results
1.
Combination of fabric, thread and needle
2.
"E8" message appearing on the stitch indicator. What does it mean and how do I clear it?
3.
Fabric and Thread
4.
My auto threader is not working. What should I do?
5.
Upper Threading (Using the twin needle)
6.
How do I remove the presser foot holder?
7.
Why does the upper thread keep breaking?
8.
Why does the lower thread keep breaking?
9.
Place a spool of thread on a spool pin.
10.
When thread got tangled.
11.
An "E1" message appears on the panel.
12.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
13.
Where do I put the oil in my machine?
14.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
15.
How do I correctly install a bobbin?
16.
When should I use the extra spool pin?
17.
How do I thread the needle?
18.
How do I load the spool into the thread cassette?
19.
How to I attach the spool of thread to my machine?
20.
"E7" message appearing on the stitch indicator. What does it mean and how do I clear it?
21.
An "E6" message appears on the panel.
22.
An "E5" message appears on the panel.
23.
An "E2" message appears on the panel.
24.
Why does my thread keep jamming?
25.
How do I manually thread the needle?
26.
It is difficult to pass the thread through the needle bar thread guide(hook).
27.
An "E4" message appears on the panel.
28.
An "E3" message appears on the panel.
29.
I slide the stitch width adjustment slider, but I can not adjust the stitch width (zigzag width).
30.
I slide the stitch length adjustment slider, but I can not adjust the stitch length.