FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovbq3100eus.jpg)
Innov-is BQ3100
125 Results
61.
How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
62.
How do I remove or attach the presser foot holder?
63.
For better results when sewing stretch fabrics
64.
"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
65.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
66.
"OK to delete the ending point setting?" message appears on the LCD. What does it mean?
67.
"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
68.
"Failed to save file." message appears on the LCD. What does it mean?
69.
"An invalid area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
70.
How do I change the volume of operation sounds or alarm sounds?
71.
About Sensor Function Area
72.
How do I thread my machine when using the twin needle mode ?
73.
How do I set the bobbin ?
74.
How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
75.
How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
76.
How do I wind the bobbin?
77.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
78.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
79.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
80.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
81.
"Lower the buttonhole lever." message appears on the LCD. What does it mean?
82.
"Raise the buttonhole lever." message appears on the LCD. What does it mean?
83.
How do I clean the race?
84.
How do I sew an applique?
85.
How do I specify the sewing end point with the sensor pen for utility stitches?
86.
"This file cannot be used." message appears on the LCD. What does it mean?
87.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
88.
"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
89.
"The needle position cannot be changed for this stitch." message appears on the LCD. What does it mean?
90.
"Set the clock." message appears on the LCD. What does it mean?