FAQs & Troubleshooting
Popular |
Innov-is 2800D
138 Results
31.
How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
32.
How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
33.
How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
34.
How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
35.
How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
36.
How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
37.
Where do I put the oil in my machine?
38.
How to clean the bobbin case(pink marking or no marking) when using a prewound bobbin.
39.
Place a spool of thread on a spool pin.
40.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
41.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
42.
"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
43.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appearing on the LCD. What does it mean and how do I clear it?
44.
How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
45.
How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
46.
How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
47.
How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
48.
How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
49.
How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
50.
How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
51.
"This pattern cannot be sewn with this mode." message appearing on the LCD. What does it mean and how do I clear it?
52.
"This embroidery frame cannot be used." message appearing on the LCD. What does it mean and how do I clear it?
53.
"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?
54.
"Transmitting by USB" message appearing on the LCD. What does it mean and how do I clear it?
55.
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
56.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
57.
"Saving the upgrade file. Do not turn MAIN power to OFF." message appearing on the LCD. What does it mean and how do I clear it?
58.
"Connected to PC. Do not disconnect the USB cable." message appearing on the LCD. What does it mean and how do I clear it?
59.
"Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?
60.
"The bobbin thread is almost empty." message appearing on the LCD. What does it mean and how do I clear it?