FAQs & Troubleshooting
Popular |
TD-4750TNWB
118 Results
1.
How to install the Mac driver via USB/ Wi-Fi®/ wired network
2.
I cannot install the Windows driver.
3.
The left or right side of the label is not printed correctly.
4.
Using the CommTool (for Windows)
5.
How to load the Ribbon
6.
The label is skipped when printing.
7.
Update the Bluetooth®/Wi-Fi® module's firmware to use Bluetooth Low Energy (BLE)
8.
How to install the Windows driver via Wi-Fi®/ wired network
9.
How to install the Windows driver via Bluetooth®
10.
How to adjust the cut position (For Windows)
11.
How to set Bluetooth Local Name or PIN code using the BPM (Brother Printer Management Tool) (for Windows)
12.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows “Paper Jam”.
13.
How to download the BMP/PCX file into your printer by the BPM (Brother Printer Management Tool) (for Windows)
14.
The time on the printer is incorrect.
15.
Enable or disable Bluetooth Low Energy (BLE)
16.
How to connect the printer to your computer (for Windows)
17.
How to transfer the print programs or templates using FBPL commands
18.
The label wraps around the platen roller when using the cutter.
19.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Paper".
20.
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
21.
How to load the Media
22.
Printing is not possible.
23.
BarTender UltraLite Edition 2021 (BarTender Designer for Brother) displays the error #1401 during printing.
24.
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
25.
When printing with the thermal transfer method, the print or cutting position gradually shifts.
26.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Ribbon" or "Ribbon Encoder Err./Ribbon End Err".
27.
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
28.
How to update the firmware
29.
How do I select just certain data (cells) in the Excel spreadsheet to place on the label? (P-touch Editor 5.x for Windows)
30.
How to set the Direct Thermal or Thermal Transfer Print Methods