FAQs & Troubleshooting
Popular |
TD-4420TN
99 Results
1.
How to install the Mac driver via USB/ Wi-Fi®/ wired network
2.
The label is skipped when printing.
3.
How to install the Windows driver via Wi-Fi®/ wired network
4.
How to skip the AUTO.BAS program only one time by directly operating the printer
5.
Using the CommTool (for Windows)
6.
Printing is not possible.
7.
I cannot install the Windows driver.
8.
When printing with the thermal transfer method, the print or cutting position gradually shifts.
9.
How to transfer the print programs or templates using FBPL commands
10.
How to connect the printer to your computer (for Windows)
11.
How to attach the External Roll Mount (Optional)
12.
How to load the Media
13.
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
14.
How to load the Ribbon
15.
How to add a new stock from the Seagull driver
16.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Ribbon" or "Ribbon Encoder Err./Ribbon End Err".
17.
I cannot print barcodes correctly using BarTender.
18.
How to adjust the cut position (For Windows)
19.
How to execute the printer configuration (Self-test) to debug
20.
How to download the BMP/PCX file into your printer by the BPM (Brother Printer Management Tool) (for Windows)
21.
How to update the firmware
22.
How to reset the printer by directly operating the printer
23.
How to adjust the printout position
24.
How to install Brother software on a computer not connected to the Internet
25.
How to configure your printer by web browser
26.
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
27.
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
28.
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
29.
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
30.
How to update firmware to all printers on the same subnet at the same time