FAQs & Troubleshooting
Popular |
HL-L8260CDW
235 Results
1.
Factory Reset
2.
Setup a Brother machine on a wireless (Wi-Fi) network.
3.
Replace the Toner Cartridge
4.
Use Universal Print (Windows)
5.
(Video) Load A4/Letter paper
6.
Replace Drum
7.
What is the default password for my Brother network card, BRAdmin, Remote Setup or Web Based Management?
8.
My Brother machine could not be found over the network when I installed drivers on my computer.
9.
Carry out calibration to improve the color density
10.
Paper is Jammed Inside the Machine
11.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device).
12.
Reset the Network Settings to the Factory Settings
13.
Print the Network Configuration Report
14.
Replace the Belt Unit
15.
Enable the Brother machine's network interface.
16.
Replace Fuser
17.
I still receive the error message "Replace Drum", "Drum End Soon", or "Drum Stop" after I replace the drum unit with a new one.
18.
Add your Brother machine with AirPrint (macOS)
19.
"Offline" appears on the Status Monitor.
20.
Replace the Waste Toner Box
21.
How to identify your Operating System (OS).
22.
The color of your printouts is not what you expected
23.
Toner Low
24.
Wireless setup is requesting a WPS PIN to complete the setup
25.
Out of Memory / Print Data Full
26.
"Unsupported data for direct print: 3020" message is printed after the document.
27.
(Video) Connect the cord
28.
Adjust color settings by using the custom setting in the printer driver
29.
Replace Laser
30.
Paper is Jammed in the MP tray