FAQs & Troubleshooting
Popular |
HL-2070N
149 Results
1.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).
2.
Printouts have a curl or wave.
3.
The printer status is Offline or Paused.
4.
How do I factory reset the print server?
5.
Printouts have wrinkles or creases.
6.
My printed documents are incomplete or a blue screen appears when printing or using PC-FAX after a Windows 10 update (March 2021)
7.
The lights in my room flicker when the printer is warming up. I get a short electric surge when the printer is warming up to print the first page. The lights in my office or work flicker or dim when using the printer.
8.
Delete print jobs from the print queue.
9.
Install the built-in drivers (For Windows 8 and Windows 10)
10.
My Brother machine misfeeds paper.
11.
The printer cannot print full pages of a document. An error message PRINT OVERRUN is printed out.
12.
The printer cannot print full pages of a document. An error message MEMORY FULL is printed.
13.
The printed letters are slanted, positioned incorrectly.
14.
Can I use non-Brother or third party supplies with the Brother machine?
15.
What can happen if the wrong paper is used in your machine.
16.
The Drum LED is still on or flashing after I replace the drum unit with a new one.
17.
Does NC-2200w work with Windows Vista?
18.
When I print, marks or stains appears on the left, right or both sides of the page. The mark consistently repeats vertically down the printed page. What is the cause of this problem? How can I fix this problem?
19.
Print on both sides of the paper.
20.
The message "[file name] can't be opened because it is from an unidentified developer." appears on OS X v10.8.x.
21.
Replace the drum unit.
22.
Can I print using the IPP protocol on Windows XP?
23.
I heard a beep sound from the UPS (Uninterruptible Power Supply) when I turned on my Brother machine.
24.
How can I clean the inside of the printer?
25.
I cannot print from my computer via network. (For Windows)
26.
The Toner LED is still on or flashing after replacing the toner cartridge, or the status monitor continues to display the message "Toner Low" or "Toner Life End".
27.
Where is the Manual 2-sided(Duplex) setting option in the Mac OS X 10.3 driver ?
28.
How can I change the printer settings?
29.
What is the recommended paper?
30.
I cannot print from my computer via USB.