FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_pe900eus.jpg)
PE900
93 Results
1.
Tutorial videos on how to use the machine [Video instructions]
2.
How do I adjust thread tension for embroidering?
3.
How to update your machine software by downloading the update file directly to your machine using a wireless network
4.
How do I hoop the fabric in the embroidery frame?
5.
Fabric puckers
6.
Stitches are skipped
7.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
8.
E92001 appears on the Artspira app screen.
9.
The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.
10.
"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
11.
How do I clean the race?
12.
How to obtain and input PIN of machine
13.
The pattern transferred from the Artspira app does not appear on the screen of the machine
14.
Where do I put the oil in my machine?
15.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
16.
The wireless network connection cannot be set up between the embroidery machine and the computer with PE-DESIGN 11.
17.
"F**" appears on the LCD. What does it mean?
18.
How do I attach or remove the Embroidery Unit?
19.
How do I change the needle ?
20.
How do I thread the machine (Threading the upper thread)?
21.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean and how do I clear it?
22.
Data cannot be saved to a USB flash drive
23.
List of Error Messages for Artspira app (Mxxxxxxx/Exxxxx)
24.
M2102501 appears on the Artspira app screen.
25.
"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
26.
Needle breaks.
27.
Bobbin thread breaks
28.
"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
29.
How do I set the bobbin ?
30.
"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?