FAQs & Troubleshooting
Popular |
PE-780D
43 Results
1.
Place a spool of thread on a spool pin.
2.
How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?
3.
How do I adjust a bobbin case using an embroidery pattern?
4.
Upper threading (Point)
5.
How do I attach the embroidery frame?
6.
Upper Threading (Threading the upper thread)
7.
It is difficult to pass the thread through the needle bar thread guide(hook).
8.
Embroidery
9.
Where do I put the oil in my machine?
10.
How do I clean the race?
11.
How do I save often-used patterns in the machine's memory?
12.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
13.
When thread got tangled.
14.
How do I wind the bobbin?
15.
"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
16.
How do I correctly install a bobbin?
17.
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
18.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
19.
Fabrics and stabilizer material for embroidery
20.
"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?
21.
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
22.
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
23.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
24.
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
25.
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
26.
"This embroidery pattern can not be used on this machine." message appearing on the LCD. What does it mean?
27.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
28.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
29.
"Insert an embroidery card." message appearing on the LCD. What does it mean?
30.
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?