FAQs & Troubleshooting
Popular |
PE-770
44 Results
1.
Where do I put the oil in my machine?
2.
How do I attach the embroidery frame?
3.
How do I adjust a bobbin case using an embroidery pattern?
4.
How do I correctly install a bobbin?
5.
How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?
6.
It is difficult to pass the thread through the needle bar thread guide(hook).
7.
How do I clean the race?
8.
Embroidery
9.
"Deleting..." message appearing on the LCD. What does it mean?
10.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
11.
How do I wind the bobbin?
12.
Place a spool of thread on a spool pin.
13.
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
14.
How do I select patterns from the embroidery cards (sold separately)?
15.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
16.
"The safety device has been activated." appears on the LCD.
17.
Upper Threading (Threading the upper thread)
18.
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
19.
Upper threading (Point)
20.
When thread got tangled.
21.
F** or "F*" appears on the LCD. What does it mean?
22.
Fabrics and stabilizer material for embroidery
23.
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
24.
"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
25.
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
26.
"This embroidery pattern can not be used on this machine." message appearing on the LCD. What does it mean?
27.
"Cannot sew on this screen." message appearing on the LCD. What does it mean?
28.
"Select a pattern." message appearing on the LCD. What does it mean?
29.
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
30.
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?