FAQs & Troubleshooting
![]() |
Popular |

NX-200
67 Results
1.
Why does the lower thread keep breaking?
2.
Place a spool of thread on a spool pin.
3.
When thread got tangled.
4.
Fabric and Thread
5.
I slide the stitch width adjustment, but I can not adjust the stitch width (zigzag width).
6.
How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
7.
How do I thread the twin needle?
8.
How do I wind the bobbin?
9.
How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
10.
How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
11.
How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
12.
How do I manually thread the needle?
13.
It is difficult to pass the thread through the needle bar thread guide(hook).
14.
How do I remove the presser foot holder?
15.
Combination of fabric, thread and needle
16.
An "E6" message appears on the panel.
17.
How do I raise or lower the feed dogs?
18.
How do I sew buttonholes?
19.
How do I sew an applique?
20.
How do I correctly install a bobbin?
21.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
22.
How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
23.
How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
24.
How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
25.
How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
26.
How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
27.
How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
28.
With free-motion quilting, skipped stitches or needle breakage occur
29.
An "E1" message appears on the panel.
30.
I slide the stitch length adjustment slider, but I can not adjust the stitch length.