FAQs & Troubleshooting
Popular |
Innov-is VE2300
67 Results
1.
How to use the Multi-purpose Screwdriver.
2.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
3.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
4.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
5.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
6.
Where do I put the oil in my machine?
7.
How do I clean the race?
8.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
9.
Embroidery
10.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
11.
"Preventive maintenance is recommended" appears on the LCD.
12.
When thread got tangled.
13.
"Set the clock." message appears on the LCD. What does it mean?
14.
How do I set the bobbin ?
15.
"This USB media cannot be used." message appears on the LCD. What does it mean?
16.
"Failed to save file." message appears on the LCD. What does it mean?
17.
How do I attach or remove the embroidery frame ?
18.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
19.
"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
20.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
21.
How do I wind the bobbin?
22.
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
23.
If the thread breaks during sewing.
24.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
25.
How do I calibrate the sensor pen?
26.
"This USB media is incompatible." message appears on the LCD. What does it mean?
27.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
28.
"Attach the embroidery frame." message appears on the LCD. What does it mean?
29.
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
30.
How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)