FAQs & Troubleshooting
Popular |
Innov-is VE2200
68 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
2.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
3.
"This USB media cannot be used." message appears on the LCD. What does it mean?
4.
How to use the Multi-purpose Screwdriver.
5.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
6.
Where do I put the oil in my machine?
7.
How do I clean the race?
8.
Embroidery
9.
"Preventive maintenance is recommended" appears on the LCD.
10.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
11.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
12.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
13.
How do I attach or remove the Embroidery Unit?
14.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
15.
"This USB media is incompatible." message appears on the LCD. What does it mean?
16.
Why does the lower thread keep breaking?
17.
"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
18.
"Failed to save file." message appears on the LCD. What does it mean?
19.
"This file cannot be used." message appears on the LCD. What does it mean?
20.
"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
21.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
22.
Why is the outline sewing off the pattern?
23.
"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
24.
"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
25.
"Set the clock." message appears on the LCD. What does it mean?
26.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
27.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
28.
How do I calibrate the sensor pen?
29.
How do I adjust the clock on the display?
30.
How do I change the needle ?