1.

How to use the Multi-purpose Screwdriver.

2.

How to use the Multi-purpose Screwdriver. [ Position “2” ]

3.

How to use the Multi-purpose Screwdriver. [ Position “3” ]

4.

How to use the Multi-purpose Screwdriver. [ Position “1” ]

5.

When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.

6.

"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?

7.

How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?

8.

"Preventive maintenance is recommended" appears on the LCD.

9.

Why is the outline sewing off the pattern?

10.

Where do I put the oil in my machine?

11.

Embroidery

12.

When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?

13.

"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?

14.

When thread got tangled.

15.

"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?

16.

"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?

17.

"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?

18.

How do I adjust the clock on the display?

19.

How do I change the needle ?

20.

"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?

21.

"Lower the presser foot lever." message appears on the LCD. What does it mean?

22.

"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?

23.

"The bobbin thread is almost empty." message appears on the LCD. What does it mean?

24.

If the thread breaks during sewing.

25.

"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?

26.

"Set the clock." message appears on the LCD. What does it mean?

27.

"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?

28.

"OK to delete the selected pattern?" message appears on the LCD. What does it mean?

29.

How do I change the volume of operation sounds or alarm sounds?

30.

How do I attach or remove the Embroidery Unit?