FAQs & Troubleshooting
Popular |
Innov-is BP2100
58 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
2.
How to use the Multi-purpose Screwdriver.
3.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
4.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
5.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
6.
How do I remove or attach the Embroidery foot ?
7.
Embroidery
8.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
9.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
10.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
11.
"USB media error" message appears on the LCD. What does it mean?
12.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
13.
"This file cannot be used." message appears on the LCD. What does it mean?
14.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
15.
How do I attach or remove the Embroidery Unit?
16.
Where do I put the oil in my machine?
17.
Fabrics and stabilizer material for embroidery
18.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
19.
How do I change the needle ?
20.
How do I create a space between characters?
21.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
22.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
23.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
24.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
25.
How do I set the bobbin ?
26.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
27.
"This USB media is incompatible." message appears on the LCD. What does it mean?
28.
"Lower the presser foot lever." message appears on the LCD. What does it mean?
29.
"This USB media cannot be used." message appears on the LCD. What does it mean?
30.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?