FAQs & Troubleshooting
Popular |
Innov-is 6700D
169 Results
1.
How to use the Multi-purpose Screwdriver.
2.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
3.
How do I use a prewound bobbin?
4.
Combination of fabric, thread and needle
5.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
6.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
7.
When thread got tangled.
8.
How do I recall a specific embroidery pattern from the computer?
9.
How do I remove the presser foot holder?
10.
Embroidery
11.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
12.
It is difficult to pass the thread through the needle bar thread guide(hook).
13.
How to clean the bobbin case(pink marking or no marking) when using a prewound bobbin.
14.
Why does the lower thread keep breaking?
15.
How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
16.
How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
17.
How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
18.
Sewing is started even though the presser foot is raised.
19.
"Preventive maintenance is recommended" appears on the LCD.
20.
How do I attach or remove the Embroidery Unit?
21.
How do I thread my machine ?
22.
The machine does not make stitches
23.
How do I attach the walking foot ?
24.
How do I set the bobbin ?
25.
How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
26.
How do I insert the bobbin case in the machine?
27.
Where do I put the oil in my machine?
28.
When can we use Standard GREEN Marked Bobbin Case?
29.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
30.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?