FAQs & Troubleshooting
Popular |
35 Results
1.
How do I clean the race?
2.
How do I retrieve a specific embroidery pattern from the computer?
3.
It is difficult to pass the thread through the needle bar thread guide(hook).
4.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
5.
Where do I put the oil in my machine?
6.
Embroidery
7.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
8.
Place a spool of thread on a spool pin.
9.
"Lower the presser foot lever." appears on the LCD.
10.
"This pattern cannot be used." message appearing on the LCD. What does it mean?
11.
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
12.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
13.
How do I confirm Windows98SE?
14.
Why does the lower thread keep breaking?
15.
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
16.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
17.
Why is the outline sewing off the pattern?
18.
Upper threading (Point)
19.
How do I save often-used patterns in the machine's memory?
20.
"Deleting..." message appearing on the LCD. What does it mean?
21.
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
22.
"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
23.
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
24.
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
25.
How do I select patterns from the embroidery cards (sold separately)?
26.
When thread got tangled.
27.
How do I correctly install a bobbin?
28.
"Saving..." message appearing on the LCD. What does it mean?
29.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
30.
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?