FAQs & Troubleshooting
Latest |
EX-660
42 Results
1. 08/05/2021
How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
2. 10/15/2020
The bobbin thread cannot be pulled up.
3. 10/15/2020
The machine does not make stitches
4. 12/12/2018
It is difficult to pass the thread through the needle bar thread guide(hook).
5. 12/12/2018
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
6. 12/12/2018
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
7. 12/12/2018
Upper threading (Point)
8. 12/12/2018
When thread got tangled.
9. 12/12/2018
Fabric and Thread
10. 07/02/2018
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
11. 07/02/2018
How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
12. 07/02/2018
How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
13. 11/03/2015
How do I remove or attach the presser foot holder?
14. 10/23/2015
Why does the lower thread keep breaking?
15. 10/21/2015
Combination of fabric, thread and needle
16. 05/14/2015
Tangled thread on wrong side of fabric
17. 05/14/2015
How do I draw up the lower thread by hand? (For models equipped with the quick-set bobbin)
18. 05/14/2015
How do I thread my machine? (Threading the needle manually [without using the needle threader])
19. 05/14/2015
How do I wind the bobbin? (For models equipped with the fast bobbin winding system)
20. 05/07/2015
Incorrect thread tension
21. 05/07/2015
Upper thread tightened up
22. 05/07/2015
How do I wind the bobbin?
23. 05/07/2015
How do I clean the machine? (Cleaning the race)
24. 04/22/2015
How do I sew a blind hem?
25. 04/22/2013
An "E6" message appears on the panel.
26. 04/22/2013
An "E5" message appears on the panel.
27. 04/22/2013
An "E4" message appears on the panel.
28. 04/22/2013
An "E3" message appears on the panel.
29. 04/22/2013
An "E2" message appears on the panel.
30. 04/22/2013
An "E1" message appears on the panel.