FAQs & Troubleshooting
Popular |
EX-660
43 Results
1.
Combination of fabric, thread and needle
2.
An "E1" message appears on the panel.
3.
Incorrect thread tension
4.
How do I sew buttonholes?
5.
Fabric and Thread
6.
An "E5" message appears on the panel.
7.
An "E6" message appears on the panel.
8.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
9.
How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
10.
The machine does not make stitches
11.
How do I clean the machine? (Cleaning the race)
12.
When thread got tangled.
13.
The bobbin thread cannot be pulled up.
14.
It is difficult to pass the thread through the needle bar thread guide(hook).
15.
How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
16.
How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
17.
Why does the lower thread keep breaking?
18.
Where do I put the oil in my machine?
19.
Place a spool of thread on a spool pin.
20.
An "E4" message appears on the panel.
21.
Tangled thread on wrong side of fabric
22.
Upper thread tightened up
23.
How do I wind the bobbin?
24.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
25.
How do I correctly install a bobbin?
26.
How do I remove or attach the presser foot holder?
27.
An "E3" message appears on the panel.
28.
Upper threading (Point)
29.
F** or "F*" appears on the LCD. What does it mean?
30.
For better results when sewing stretch fabrics