FAQs & Troubleshooting
![]() |
Popular |

ES-2000/2000T
74 Results
1.
An "E2" message appears on the panel.
2.
How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
3.
Combination of fabric, thread and needle
4.
When thread got tangled.
5.
The bobbin thread cannot be pulled up.
6.
How do I thread my machine? (Threading the needle manually [without using the needle threader])
7.
Why does the lower thread keep breaking?
8.
How do I install the bobbin wound with thread? (For models equipped with the quick-set bobbin)
9.
How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
10.
The machine does not make stitches
11.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
12.
How do I thread my machine? (For models equipped with the needle threader)
13.
How do I clean the machine? (Cleaning the race)
14.
Place a spool of thread on a spool pin.
15.
How do I change the needle ?
16.
How do I wind the bobbin?
17.
How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
18.
How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
19.
How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
20.
Incorrect thread tension
21.
How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
22.
How do I remove or attach the presser foot ?
23.
How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
24.
How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
25.
How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
26.
It is difficult to pass the thread through the needle bar thread guide(hook).
27.
An "E6" message appears on the panel.
28.
How do I sew an applique?
29.
Fabric and Thread
30.
How do I draw up the lower thread by hand? (For models equipped with the quick-set bobbin)