FAQs & Troubleshooting
Popular |
DC200
257 Results
1.
How do I Change or Delete a Registered CanvasWorkspace Login ID?
2.
List of Error Messages
3.
About CaptureMat FUNCTION (Wireless Network Connection Only)
4.
About Blade Extension, Cutting Pressure and Mat
5.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
6.
The material to be cut/drawn peels off during cutting/drawing.
7.
How to set up the wireless connection using WLAN Assistant Wizard with USB cable. (Windows only)
8.
Adjusting the Blade Extension
9.
The mat or the material catches on a feed roller during cutting/drawing.
10.
About DesignNCut Manager
11.
What should I do if the software update fails?
12.
The mat is fed in at an angle and is not fed during cutting / drawing.
13.
How to register Your Machine with CanvasWorkspace
14.
List of Error Messages for CanvasWorkspace (Others)
15.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
16.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
17.
E00003 appears on the computer screen.
18.
Mat and Material Combinations
19.
Replacing the Blade
20.
E00004 appears on the computer screen.
21.
How to connect the Machine and Computer with a USB Cable? (Windows only)
22.
An error appears when trying to import a DXF file.
23.
Can different types of material be attached to the same mat for cutting?
24.
How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
25.
Cutting/Drawing by Tracing an Image
26.
How do I transfer the pattern (to cut, draw, line emboss, etc.) using a USB cable? (Windows only)
27.
Basic Operation for cutting
28.
The AutoPlay dialog box may appear on the computer repeatedly. (For Windows)
29.
How do I Register The Machine With CanvasWorkspace (Web)? (Wireless Network Connection Only)
30.
How to set up the wireless connection using wireless network name (SSID) & network password (key). (Recommended Setup, Computer Instructions.)