FAQs & Troubleshooting
Popular |
CS-80
39 Results
1.
"E8" message appearing on the stitch indicator. What does it mean and how do I clear it?
2.
When thread got tangled.
3.
How do I thread the needle?
4.
How to I attach the spool of thread to my machine?
5.
An "E1" message appears on the panel.
6.
"E7" message appearing on the stitch indicator. What does it mean and how do I clear it?
7.
Combination of fabric, thread and needle
8.
Why does my thread keep jamming?
9.
How do I correctly install a bobbin?
10.
How do I manually thread the needle?
11.
It is difficult to pass the thread through the needle bar thread guide(hook).
12.
An "E4" message appears on the panel.
13.
How do I wind the bobbin?
14.
An "E6" message appears on the panel.
15.
An "E5" message appears on the panel.
16.
Place a spool of thread on a spool pin.
17.
How do I load the spool into the thread cassette?
18.
An "E3" message appears on the panel.
19.
An "E2" message appears on the panel.
20.
Why does the needle keep breaking?
21.
Fabric and Thread
22.
Where do I put the oil in my machine?
23.
When should I use the extra spool pin?
24.
I slide the stitch length adjustment slider, but I can not adjust the stitch length.
25.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
26.
Why does the lower thread keep breaking?
27.
My auto threader is not working. What should I do?
28.
Incorrect thread tension
29.
Upper Threading (Using the twin needle)
30.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.