FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_cs8060eus.jpg)
CS-8060
39 Results
1.
"E7" message appearing on the stitch indicator. What does it mean and how do I clear it?
2.
Combination of fabric, thread and needle
3.
An "E3" message appears on the panel.
4.
Fabric and Thread
5.
Why does the lower thread keep breaking?
6.
It is difficult to pass the thread through the needle bar thread guide(hook).
7.
I slide the stitch length adjustment slider, but I can not adjust the stitch length.
8.
I slide the stitch width adjustment slider, but I can not adjust the stitch width (zigzag width).
9.
How do I remove the presser foot holder?
10.
How to I attach the spool of thread to my machine?
11.
Where do I put the oil in my machine?
12.
When thread got tangled.
13.
Place a spool of thread on a spool pin.
14.
How do I load the spool into the thread cassette?
15.
Incorrect thread tension
16.
Why does my thread keep jamming?
17.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
18.
How do I sew buttonholes?
19.
An "E4" message appears on the panel.
20.
An "E1" message appears on the panel.
21.
How do I thread the needle?
22.
Why does the upper thread keep breaking?
23.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
24.
Upper Threading (Using the twin needle)
25.
How do I manually thread the needle?
26.
"E8" message appearing on the stitch indicator. What does it mean and how do I clear it?
27.
An "E5" message appears on the panel.
28.
Why does the needle keep breaking?
29.
How do I wind the bobbin?
30.
How do I sew a blind hem?