1. 12/26/2018

If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?

2. 07/10/2017

Mat and Material Combinations

3. 07/10/2017

Mat and Cutting Blade Combinations

4. 07/10/2017

The material to be cut/drawn or original to be scanned peels off during cutting/scanning.

5. 07/10/2017

The mat is fed in at an angle and is not fed during cutting / drawing.

6. 07/10/2017

The mat or the material catches on a feed roller during cutting/drawing.

7. 07/10/2017

When the mat is inserted, the attached material peels off.

8. 07/10/2017

The material to be cut/drawn or original to be scanned cannot be attached to the mat.

9. 10/22/2015

The 12" × 24" (305 mm × 610 mm) mat cannot be used with scanning function.

10. 08/19/2015

There are deep cuts completely through the mat.

11. 07/31/2015

The mat cannot be fed.

12. 07/31/2015

The mat cannot be recognized.

13. 01/22/2014

The mat cannot be inserted.

14. 11/28/2013

The mat or the material catches on a feed roller when the mat is being inserted.

15. 11/28/2013

The mat cannot be fed out.

16. 11/28/2013

The mat is fed in at an angle.