1.

How do I clean the machine? (Cleaning the race)

2.

Combination of fabric, thread and needle

3.

How do I thread my machine? (For models equipped with the needle threader)

4.

How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]

5.

How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]

6.

It is difficult to pass the thread through the needle bar thread guide(hook).

7.

When thread got tangled.

8.

Fabric is caught in the machine and cannot be removed

9.

Upper thread tightened up

10.

How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]

11.

How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]

12.

How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]

13.

Fabric and Thread

14.

The machine does not make stitches

15.

How do I change the needle ?

16.

How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]

17.

How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]

18.

How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]

19.

How do I install the bobbin wound with thread? (For models equipped with the quick-set bobbin)

20.

Where do I put the oil in my machine?

21.

Tangled thread on wrong side of fabric

22.

How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]

23.

How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]

24.

How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]

25.

How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]

26.

How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]

27.

How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]

28.

How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]

29.

How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]

30.

How do I draw up the lower thread by hand? (For models equipped with the quick-set bobbin)