FAQs & Troubleshooting
Popular |
PR-650/650C
42 Results
1.
How to set up the cap frame driver. [Video instructions]
2.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
3.
How to set up the cap frame. [Video instructions]
4.
Maintenance (Oiling the machine)
5.
Maintenance (Oiling the machine) [ Video ]
6.
Maintenance (Cleaning the bobbin case) [ Video ]
7.
Maintenance (Clean the hook) [ Video ]
8.
"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
9.
Maintenance (Cleaning around the needle plate) [ Video ]
10.
Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
11.
Why does the upper thread keep breaking?
12.
How do I thread my machine (Threading the upper thread). [Video instructions]
13.
How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
14.
How do I thread the needle. [Video instructions]
15.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
16.
Why is the outline sewing off the pattern?
17.
Why won't the tension set on my sewing machine?
18.
Maintenance (Cleaning the thread paths of the upper threads)
19.
Why does the needle keep breaking?
20.
How do I thread the machine? (Threading the upper thread)
21.
Embroidery
22.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
23.
Colors of Tajima (.dst) embroidery data
24.
Maintenance (Cleaning the bobbin case)
25.
Why won't the machine pick up the bobbin thread?
26.
Maintenance (Clean the hook)
27.
When thread got tangled
28.
Maintenance (Cleaning around the needle plate)
29.
How do I change the volume of operation sounds or alarm sounds?
30.
Why cannot the needle threader be used?