FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_600eus.jpg)
PR-600/600C
71 Results
1.
How to set up the cap frame. [Video instructions]
2.
How to set up the cap frame driver. [Video instructions]
3.
Why is the outline sewing off the pattern?
4.
How do I thread the needle. [Video instructions]
5.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
6.
How do I thread my machine (Threading the upper thread). [Video instructions]
7.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
8.
How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
9.
"Inappropriate needle stop position." message appearing on the LCD. What does it mean and how do I clear it?
10.
Maintenance (Oiling the machine)
11.
How do I thread the machine? (Threading the upper thread)
12.
Why won't the tension set on my sewing machine?
13.
Embroidery
14.
Fabric and Thread
15.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the PR series?
16.
"Preventive maintenance is recommended" appears on the LCD.
17.
How do I install the bobbin wound with thread
18.
Fabric/stabilizer compatibility chart
19.
Maintenance (Cleaning the bobbin case)
20.
"CompactFlash Card erase error." message appearing on the LCD. What does it mean and how do I clear it?
21.
Why won't the machine pick up the bobbin thread?
22.
When thread got tangled
23.
How do I create a space between characters?
24.
"The selected embroidery pattern exceeds size of the frame." message appearing on the LCD. What does it mean and how do I clear it?
25.
"Maximum number of patterns have been combined." message appearing on the LCD. What does it mean and how do I clear it?
26.
Why does the upper thread keep breaking?
27.
Place a spool of thread on a spool pin
28.
Stabilizers (Backing)
29.
Hooping the Fabric
30.
"Impossible to reserve this needle." message appearing on the LCD. What does it mean and how do I clear it?