SB7050E
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_sb7050eeus.jpg)
SB7050E
Sort by
20 Results
1. 05/20/2024
F** or "F*" appears on the LCD. What does it mean?
2. 06/04/2018
"Raise presser foot lever." message appearing on the LCD. What does it mean?
3. 06/04/2018
"Deleting..." message appearing on the LCD. What does it mean?
4. 06/04/2018
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
5. 06/04/2018
"This pattern cannot be used." message appearing on the LCD. What does it mean?
6. 06/04/2018
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
7. 06/04/2018
"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
8. 03/31/2016
"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?
9. 03/31/2016
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
10. 03/31/2016
"Saving..." message appearing on the LCD. What does it mean?
11. 03/31/2016
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
12. 03/31/2016
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
13. 03/31/2016
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
14. 03/31/2016
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
15. 03/31/2016
"Winding bobbin thread." message appearing on the LCD. What does it mean?
16. 03/31/2016
"Cannot sew on this screen." message appearing on the LCD. What does it mean?
17. 03/31/2016
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
18. 09/08/2014
"Lower the presser foot lever." appears on the LCD.
19. 04/07/2009
"The safety device has been activated." appears on the LCD.
20. 02/26/2009
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?