TJ-4422TN
 |
Preguntas frecuentes y solución de problemas |
TJ-4422TN
Agrupar por
20 Resultados
1. 12/13/2021
How to adjust the cut position (For Windows)
2. 12/13/2021
How to set the Direct Thermal or Thermal Transfer Print Methods
3. 01/29/2021
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
4. 01/29/2021
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
5. 09/28/2020
Printing the printer configuration (Self-test)
6. 09/28/2020
The print quality is poor.
7. 09/28/2020
The left or right side of the label is not printed correctly.
8. 09/28/2020
The printed label is wrinkled.
9. 09/28/2020
How to skip the AUTO.BAS program only one time by directly operating the printer
10. 09/28/2020
How to execute the printer configuration (Self-test) to debug
11. 09/28/2020
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
12. 09/28/2020
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
13. 02/20/2020
When printing with the thermal transfer method, the print or cutting position gradually shifts.
14. 02/19/2020
Printing is not possible.
15. 03/13/2019
The printing position of small label is incorrect.
16. 03/13/2019
How to change the speed and density in BarTender
17. 03/13/2019
How to change the printer code page
18. 03/13/2019
How to adjust the tear position in BarTender
19. 03/13/2019
How to adjust the printout position
20. 03/13/2019
How to add a new stock from the Seagull driver