FAQs & Troubleshooting
![]() |
Latest |
![](/g/b/img/product/hf_inovnq3500deas.jpg)
Innov-is NQ3500D
120 Results
61. 10/04/2018
How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
62. 21/07/2017
"F**" appears on the LCD. What does it mean?
63. 21/07/2017
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
64. 28/02/2017
Combination of fabric, thread and needle
65. 28/02/2017
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
66. 28/02/2017
How do I sew with the twin needle?
67. 28/02/2017
"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
68. 28/02/2017
How do I remove or attach the presser foot holder?
69. 28/02/2017
"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
70. 28/02/2017
Tangled thread on wrong side of fabric
71. 28/02/2017
Fabric is caught in the machine and cannot be removed
72. 28/02/2017
"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
73. 28/02/2017
How do I remove or attach the Embroidery foot ?
74. 28/02/2017
How do I attach or remove the Embroidery Unit?
75. 28/02/2017
How do I change the needle ?
76. 28/02/2017
How do I remove or attach the presser foot ?
77. 28/02/2017
How do I thread the machine (Threading the upper thread)?
78. 28/02/2017
How do I wind the bobbin?
79. 28/02/2017
"Turn off the power and replace the needle plate." appears on the LCD.
80. 28/02/2017
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
81. 28/02/2017
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
82. 28/02/2017
"Lower the buttonhole lever." message appears on the LCD. What does it mean and how do I clear it?
83. 28/02/2017
"Raise the buttonhole lever." message appears on the LCD. What does it mean?
84. 28/02/2017
"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
85. 28/02/2017
How do I clean the race?
86. 16/02/2017
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
87. 01/12/2016
When the thread became tangled under the bobbin winder seat
88. 01/12/2016
Upper thread tightened up
89. 29/07/2016
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
90. 29/07/2016
"Not enough available memory to save." message appears on the LCD. What does it mean?