FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_pr1050xeas.jpg)
PR1050X
132 Results
1.
Tutorial videos on how to use the machine [Video instructions]
2.
Aligning the embroidering position using the built-in camera
3.
Displaying the fabric on the LCD when aligning the embroidering position
4.
Aligning the embroidering position using the embroidery positioning sticker
5.
Changing the embroidering position and Adjusting the angle
6.
How to Embroider on Pet Collar. [Video instructions]
7.
How to set up the cap frame. [Video instructions]
8.
Maintenance (Clean the hook) [ Video ]
9.
Maintenance (Oiling the machine) [ Video ]
10.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
11.
How do I set the machine to trim the threads between the characters?
12.
Maximum sewing speed setting
13.
Reserved needle bar and sewing speed settings
14.
Specifying jumpstitch trimming or DST jump codes for trimming
15.
Temporary needle bar setting
16.
Setting the machine to stop at color changes
17.
How do I manually specify or manage the thread colors assigned to each needle bar?
18.
How do I delete short stitches ?
19.
Embroidery pattern does not sew out correctly.
20.
Loops appear on the surface of the fabric when embroidering.
21.
Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
22.
Maintenance (Cleaning around the needle plate) [ Video ]
23.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
24.
"OK to cancel embroidering?" message appears on the LCD. What does it mean?
25.
How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
26.
How to use the Round frame (PRPRFK1) [Video instructions]
27.
How to use the the versatile magnetic frame [Video instructions]
28.
How do I specify the starting position or the ending position of embroidering?
29.
How do I check the thread tension ?
30.
The needle threader cannot be used.