NX-400Q/400
FAQs & Troubleshooting |
NX-400Q/400
Sort by
14 Results
1. 20/05/2024
F** or "F*" appears on the LCD. What does it mean?
2. 31/03/2016
"Saving..." message appearing on the LCD. What does it mean?
3. 31/03/2016
"No more stitches can be combined." message appearing on the LCD. What does it mean?
4. 31/03/2016
"Delete the selected pattern." message appearing on the LCD. What does it mean?
5. 31/03/2016
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
6. 31/03/2016
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
7. 31/03/2016
"Winding bobbin thread." message appearing on the LCD. What does it mean?
8. 14/05/2015
"Change to the single needle mode." appears on the LCD.
9. 07/04/2009
"Lower the presser foot lever." appears on the LCD.
10. 07/04/2009
"Lower the buttonhole lever." appears on the LCD.
11. 07/04/2009
"Lift the buttonhole lever." appears on the LCD.
12. 07/04/2009
"The safety device has been activated." appears on the LCD.
13. 26/02/2009
"Can not change." message appearing on the LCD. What does it mean?
14. 26/02/2009
"Disconnect the foot control." appears on the LCD.