FAQs & Troubleshooting
Popular |
CM550DX/ CM550
292 Results
1.
Mat and Cutting Blade Combinations
2.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
3.
Adjusting the Blade Extension
4.
About Blade Extension, Cutting Pressure and Mat
5.
The machine is turned off (Auto Shut Down).
6.
Preparation of Craft Paper / Fabric
7.
The Calligraphy Font in the USB Flash Drive is Not Displayed
8.
E11002 appears on the computer screen.
9.
E00009 appears on the computer screen.
10.
What should I do if the scanned and cut positions are misaligned?
11.
What type of data can my ScanNCut machine be used?
12.
Downloading Optional Design Pattern Collection
13.
Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
14.
Mat and Material Combinations
15.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
16.
E94004 appears on the computer screen.
17.
Can different types of material be attached to the same mat for cutting?
18.
Can multiple sheets of material be overlapped and attached to the mat?
19.
Cutting/Drawing by Tracing an Image
20.
How to create an account for CanvasWorkspace
21.
How to use a Universal Pen Holder
22.
Can I create the cutting data for ScanNCut from the image data?
23.
Care and Maintenance (Cleaning the Scanner Glass)
24.
The mat or the material catches on a feed roller during cutting/drawing.
25.
E90001 appears on the computer screen.
26.
Selecting multiple patterns and delete [Video]
27.
ErrS10 appears on the computer screen.
28.
ErrS01 appears on the computer screen.
29.
E92002 appears on the computer screen.
30.
What should I do if I change the size (enlarge/reduce) of the Disney Pattern downloaded?