FAQs & Troubleshooting
Popular |
CM900
318 Results
1.
About Blade Extension, Cutting Pressure and Mat
2.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
3.
The mat or the material catches on a feed roller during cutting/drawing.
4.
The mat is fed in at an angle and is not fed during cutting / drawing.
5.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
6.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
7.
Mat and Cutting Blade Combinations
8.
List of Error Messages for CanvasWorkspace (Others)
9.
Mat and Material Combinations
10.
I cannot transfer the created/edited data to CanvasWorkspace (Web) or the machine wirelessly. What should I do?
11.
Can I create the cutting data for ScanNCut from the image data?
12.
Downloading Optional Design Pattern Collection
13.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
14.
Can I create the cutting data for ScanNCut from vector graphics data?
15.
Can rough material be cut?
16.
How do I Scan for Cutting (Direct Cut) ?
17.
How to Calibrate the LCD Touchscreen Display
18.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
19.
What should I do if the scanned and cut positions are misaligned?
20.
What type of data can my ScanNCut machine be used?
21.
Replacement Criteria
22.
Adjusting the Blade Extension
23.
E94002 appears on the computer screen.
24.
E10004 appears on the computer screen.
25.
E00011 appears on the computer screen.
26.
The machine is turned off (Auto Shut Down).
27.
ErrS01 appears on the computer screen.
28.
ErrS24 appears on the computer screen.
29.
E12003 appears on the computer screen.
30.
E10007 appears on the computer screen.