FAQs & Troubleshooting
Popular |
CM550DX/ CM550
292 Results
1.
About Blade Extension, Cutting Pressure and Mat
2.
Mat and Material Combinations
3.
Mat and Cutting Blade Combinations
4.
Downloading Optional Design Pattern Collection
5.
Can I create the cutting data for ScanNCut from the image data?
6.
The mat or the material catches on a feed roller during cutting/drawing.
7.
Adjusting the Blade Extension
8.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
9.
List of Error Messages for CanvasWorkspace (Others)
10.
The mat is fed in at an angle and is not fed during cutting / drawing.
11.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
12.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
13.
Preparation of Craft Paper / Fabric
14.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
15.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
16.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
17.
What type of data can my ScanNCut machine be used?
18.
Can I create the cutting data for ScanNCut from vector graphics data?
19.
"Please register your machine." appears on the computer screen.
20.
How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
21.
What should I do if the scanned and cut positions are misaligned?
22.
Attaching & Peeling Off the Material
23.
The Calligraphy Font in the USB Flash Drive is Not Displayed
24.
Replacing the Blade
25.
Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
26.
Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
27.
How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
28.
ErrS12 appears on the computer screen.
29.
The machine is turned off (Auto Shut Down).
30.
How to Calibrate the LCD Touchscreen Display