FAQs & Troubleshooting
Popular |
FAX-878
39 Results
1.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).
2.
Can I confirm that the FAX was sent correctly?
3.
Can I reduce the size of a received fax on this machine?
4.
"DOCUMENT JAM" error appears on the LCD. What should I do?
5.
Can I connect my External Answering Device in another room and still receive faxes?
6.
I have an external telephone answering device on the same line as my FAX and have the answer mode on my FAX set for TAD mode. How do I know if an incoming call is a telephone (voice) call or a fax?
7.
How do I connect an External Telephone?
8.
What is Distinctive Ring and how do I program it?
9.
Can an External Answering Device(TAD) be used instead of the built-in one?
10.
How can I clear the "PAPER JAM" error message?
11.
How do I improve the copy or fax quality?
12.
What does "NG" on the Transmission Verification Report mean?
13.
How do I clean the print head?
14.
How do I set up a answering machine (TAD) to work on the same line as the fax?
15.
How do I replace the ribbon?
16.
Can I print from or scan to Android™ Smartphone?
17.
Can I print from and scan to iPhone, iPod touch and iPad?
18.
My FAX/MFC will not Dial. Why?
19.
How does the "FAX/TEL" Mode work?
20.
How do I clean the Scanner to improve the copy or fax quality?
21.
Do I need a telephone line to send and receive faxes with my Brother machine?
22.
Vertical streaks appear in my copies.
23.
Why can't I copy or send? All the keys just beep 3 times.
24.
How do I print the received faxes that are stored in memory? (Fax Storage)
25.
My Brother machine has no power.
26.
How do I program the date and time?
27.
Why are my sent faxes always received with a black vertical line down the page?
28.
When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY". What should I do?
29.
"UNABLE TO..." or "MEMORY DISABLED" message appearing on the LCD. What does it mean and how do I clear it?
30.
How to clear "PRINTHEAD OVERHEATED WAIT TO COOL" Error?