1.

What does "NG" on the Transmission Verification Report mean?

2.

How do I improve the copy or fax quality?

3.

My FAX/MFC will not Dial. Why?

4.

The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).

5.

I have an external telephone answering device on the same line as my FAX and have the answer mode on my FAX set for TAD mode. How do I know if an incoming call is a telephone (voice) call or a fax?

6.

Can I confirm that the FAX was sent correctly?

7.

Can I connect my External Answering Device in another room and still receive faxes?

8.

What is Distinctive Ring and how do I program it?

9.

How does the "FAX/TEL" Mode work?

10.

How can I clear the "PAPER JAM" error message?

11.

Can I reduce the size of a received fax on this machine?

12.

Can an External Answering Device(TAD) be used instead of the built-in one?

13.

How do I connect an External Telephone?

14.

What does the pseudo-ring (double ring) indicate in the F/T Mode?

15.

How do I replace the ribbon? (Ribbon Empty -Reset or Replace)

16.

I am experiencing problems sending a fax, what can I do?

17.

How do I know which receive mode to select?

18.

I have an external telephone answering device (TAD) connected to my FAX, have the answer mode set for TAD and the Ring Delay set to zero. Why does my answering machine still pick up when receiving a fax call?

19.

When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY". What should I do?

20.

Can I print from and scan to iPhone, iPod touch and iPad?

21.

What does it mean if the fax machine rings its pseudo-ring/ double-ring (F/T RING TIME) and there is not a voice call?

22.

When receiving a 1 page fax, why does the fax print on 2 pages or a blank sheet ejects afterwards?

23.

Vertical streaks appear in my copies.

24.

Can I print from or scan to Android™ Smartphone?

25.

My Brother machine has no power.

26.

"UNABLE TO..." or "MEMORY DISABLED" message appearing on the LCD. What does it mean and how do I clear it?

27.

I have a telephone answering device (TAD) on the same line as my FAX. Is necessary to record a 5 second pause before my outgoing message begins?

28.

How to clear "PRINTHEAD OVERHEATED WAIT TO COOL" Error?

29.

I have my FAX machine set in the FAX/TEL (F/T) answer mode. What happens if I do not answer the telephone and it's a non fax call?

30.

Can I print a report that will show a listing of faxes I sent and received?