FAQs & Troubleshooting
Popular |
FAX-827/ FAX-827S
35 Results
1.
What is Distinctive Ring and how do I program it?
2.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).
3.
Can I print from or scan to Android™ Smartphone?
4.
How do I know which receive mode to select?
5.
Can I print from and scan to iPhone, iPod touch and iPad?
6.
I have an external telephone answering device on the same line as my FAX and have the answer mode on my FAX set for TAD mode. How do I know if an incoming call is a telephone (voice) call or a fax?
7.
I have an external telephone answering device (TAD) connected to my FAX, have the answer mode set for TAD and the Ring Delay set to zero. Why does my answering machine still pick up when receiving a fax call?
8.
Can I connect my External Answering Device in another room and still receive faxes?
9.
What does the pseudo-ring (double ring) indicate in the F/T Mode?
10.
How can I clear the "PAPER JAM" error message?
11.
What does "NG" on the Transmission Verification Report mean?
12.
Can I confirm that the FAX was sent correctly?
13.
Can I reduce the size of a received fax on this machine?
14.
I have a telephone answering device (TAD) on the same line as my FAX. Is necessary to record a 5 second pause before my outgoing message begins?
15.
Why can't I copy or send? All the keys just beep 3 times.
16.
I have my FAX machine set in the FAX/TEL (F/T) answer mode. What happens if I do not answer the telephone and it's a non fax call?
17.
When receiving a 1 page fax, why does the fax print on 2 pages or a blank sheet ejects afterwards?
18.
When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY". What should I do?
19.
Set up an answering machine (TAD) to work on the same line as the fax.
20.
How do I connect an External Telephone?
21.
Can I print a report that will show a listing of faxes I sent and received?
22.
How do I print the received faxes that are stored in memory? (Fax Storage)
23.
How do I program the date and time?
24.
How do I improve the copy or fax quality?
25.
Why are my sent faxes always received with a black vertical line down the page?
26.
My FAX/MFC will not Dial. Why?
27.
Do I need a telephone line to send and receive faxes with my Brother machine?
28.
My Brother machine has no power.
29.
"UNABLE TO..." or "MEMORY DISABLED" message appearing on the LCD. What does it mean and how do I clear it?
30.
How do I replace the ribbon? (Ribbon Empty -Reset or Replace)