FAQs & Troubleshooting
Popular |
Innov-is NV800E
57 Results
31.
"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
32.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
33.
"This USB media cannot be used." message appears on the LCD. What does it mean?
34.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
35.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
36.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
37.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
38.
Bobbin thread breaks
39.
"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
40.
"F**" appears on the LCD. What does it mean?
41.
"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
42.
How do I thread the machine (Threading the upper thread)?
43.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
44.
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
45.
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
46.
"Check and rethread the upper thread." message appears on the LCD. What does it mean?
47.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean and how do I clear it?
48.
"This pattern cannot be used." message appears on the LCD. What does it mean?
49.
Upper thread breaks.
50.
How do I hoop the fabric in the embroidery frame?
51.
"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
52.
How do I change the needle ?
53.
How do I remove or attach the presser foot ?
54.
How do I wind the bobbin?
55.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
56.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
57.
"Preventive maintenance is recommended" appears on the LCD.